I recently used Simify for my travels, and while the eSIM setup was smooth, I ran into internet issues because the APN settings weren’t configured automatically. If you’re facing the same problem—no mobile data, slow speeds, or network errors—this guide will walk you through everything you need to know.
I’ll explain what Simify APN settings are, why they matter, and how to manually configure them on iPhone and Android. I’ll also share troubleshooting fixes that worked for me when Simify wasn’t connecting to the internet.
Simify APN Settings for iPhone (iOS)
| Field | Value |
| APN | simify |
| Username | (Leave Blank) |
| Password | (Leave Blank) |
| MMSC | (If provided by Simify) |
| MMS Proxy | (Leave Blank unless required) |
| APN Protocol | IPv4/IPv6 |
| APN Type | default,supl |
| Authentication Type | PAP or CHAP |
Steps to Configure:
- Navigate to Settings → Cellular → Cellular Data Network.
- Enter the above values in the respective fields.
- Save settings and restart your device.
Simify APN Settings for Android Devices
| Field | Value |
| APN Name | Simify |
| APN | simify |
| Proxy | (Leave Blank) |
| Port | (Leave Blank) |
| Username | (Leave Blank) |
| Password | (Leave Blank) |
| MMSC | (If provided by Simify) |
| MMS Proxy | (Leave Blank unless required) |
| MCC/MNC | Set Automatically |
| APN Type | default,supl |
| APN Protocol | IPv4/IPv6 |
| Bearer | LTE |
Steps to Configure:
- Go to Settings → Network & Internet → Mobile Network → Access Point Names.
- Tap “+” or “Add New APN” and input the values from the table.
- Save and select this APN profile, then restart your phone.
Understanding Simify and Why APN Settings Matter
What is Simify?
Simify is an international eSIM and travel SIM provider that works across multiple networks worldwide. It helps travelers avoid expensive roaming fees by connecting to local carriers.
Why APN Settings Are Important
APN (Access Point Name) settings tell your device how to connect to Simify’s mobile data network. If the settings are incorrect, you won’t be able to access the internet.
Why you might need to enter APN settings manually:
- Your phone doesn’t auto-detect Simify’s APN.
- You’re using an unlocked phone from another carrier.
- You’re traveling internationally, and the local network requires manual setup.
- Your phone is stuck on “No Service” or “Emergency Calls Only.”
If you’re experiencing any of these issues, setting up Simify APN manually can help.
Preparing for APN Configuration
Before setting up Simify APN, here’s what you need to check:
Check If Your Phone is Compatible
- Make sure your phone is unlocked (not restricted to a single carrier).
- If using Simify eSIM, confirm that your phone supports eSIM activation.
Things You Need Before Entering APN Settings
- Active Simify SIM or eSIM.
- Wi-Fi connection (in case the APN download is required).
- Airplane Mode turned off (this blocks mobile data).
- Roaming enabled (especially for international SIMs).
Simify APN Settings for iPhone and Android
Simify APN Settings for iPhone (iOS)
If your Simify eSIM isn’t connecting, follow these steps:
Step-by-Step Guide to Enter Simify APN on iPhone
- Go to Settings → Cellular → Cellular Data Network.
- Tap on Mobile Data/APN Settings.
- Enter the following details:
| Field | Value |
| APN | simify |
| Username | (Leave blank) |
| Password | (Leave blank) |
| MMSC | (Only if provided by Simify) |
| MMS Proxy | (Leave blank unless required) |
- Tap Save, then restart your iPhone.
- Test internet by opening a website or running a speed test.
Simify APN Settings for Android Devices
Step-by-Step Guide to Enter Simify APN on Android
- Go to Settings → Network & Internet → Mobile Network.
- Tap Access Point Names (APN) → + or Add New APN.
- Enter the following details:
| Field | Value |
| APN Name | Simify |
| APN | simify |
| Proxy | (Leave Blank) |
| Port | (Leave Blank) |
| Username | (Leave Blank) |
| Password | (Leave Blank) |
| MMSC | (Only if provided by Simify) |
| MMS Proxy | (Leave Blank unless required) |
| MCC/MNC | (Set automatically) |
| APN Type | default,supl |
| APN Protocol | IPv4/IPv6 |
| Bearer | LTE |
- Save the APN settings and select it as the active APN.
- Restart your phone or toggle Airplane Mode.
Troubleshooting Common Simify APN Issues
1. No Internet After Setting APN
Fix:
WhatsApp
Join Now
- Ensure mobile data and roaming are enabled.
- Restart your phone and reselect the APN.
2. Slow Internet or 4G/5G Not Working
Fix:
- Try switching between 4G and 5G in network settings.
- Move to an area with better signal strength.
3. “Could Not Activate Cellular Data Network” Error
Fix:
- Recheck APN details—typos in APN settings can block connections.
- Reset network settings:
- iPhone: Settings → General → Reset → Reset Network Settings.
- Android: Settings → System → Reset Options → Reset Wi-Fi, Mobile & Bluetooth.
4. APN Settings Not Saving on Android
Fix:
- Try adding the APN in Airplane Mode, then enable mobile data.
- If APN fields are locked, your phone may be carrier-locked—contact Simify Support.
Pro Tips for a Smooth Simify Experience
Keep Your Phone Updated
- Always update iOS or Android to avoid compatibility issues.
Use Simify’s Official Support
- If the APN settings don’t work, contact Simify support for region-specific details.
- Simify Support Page
Test Simify eSIM Before Traveling
- If you’re using Simify for international travel, activate and test it before your trip.
Frequently Asked Questions (FAQ)
Do I Need Wi-Fi to Set Up Simify APN?
Yes, especially if you’re downloading carrier profiles for the first time.
Why Can’t I Find APN Settings on My Phone?
- Some phones disable manual APN settings—try inserting a different SIM card to unlock them.
Will I Be Charged Extra for Changing APN Settings?
No, APN changes don’t affect billing. Your data usage depends on your Simify plan.
Does Simify APN Work for 5G?
Yes, but only if your phone and Simify plan support 5G.
Conclusion
Hey fam, that’s all for today’s blog on Simify APN settings! Remember, sometimes your phone won’t auto-configure those network settings and you gotta do it manually with the steps I just showed you.
If you’re still having trouble after everything we went through, double-check for any typos in those APN fields, try resetting your network settings completely, or just hit up Simify Support—they’re actually pretty helpful!
Don’t forget to smash that like button if this helped you out, and if you’ve got a question or figured out another way to fix this problem, drop it down in the comments below! I love hearing about your experiences and we can all learn from each other.